[Sam-users] Prodos v2 and simcoupe 1.2.5

[Stefan Drissen]

And fixed by Simon. :-)

On Thu, Sep 9, 2021 at 11:46 PM Edwin blink <edwin.blink at ziggo.nl> wrote:

> Thanks Dan and Stefan :)
>
>
>
> Didn't want to submit an issue on Github right away in case I was just
> missing something obvious ;)
>
>
>
> *Van:* Dan Doore [mailto:dan at dandoore.com]
> *Verzonden:* donderdag 9 september 2021 23:22
> *Aan:* Edwin blink
> *CC:* sam-users
> *Onderwerp:* Re: [Sam-users] Prodos v2 and simcoupe 1.2.5
>
>
>
> Put this on the SimCoupe GitHub issues - no wait, Stefan has already
> logged it :)
>
> Dan.
>
>
>
>
>
> On 9 Sep 2021, at 22:05, Edwin blink <edwin.blink at ziggo.nl> wrote:
>
> 
>
> This ones probably for Simon :)
>
>
>
> I was playing a bit with  prodos v2 and noticed I get a read only error
> with current simcoupe buid  (1.2.5)
>
>
>
> Example:
>
> -Boot Prodos v2 disk in simcoupe
>
> -from menu:  new DOS CP/M disk
>
> -format  b: -> OK
>
> -copy a: b:  -> is read only error
>
> -format b: -> Format error
>
>
>
> Didn’t have any issues when using simcoupe 1.0
>
>
>
>
>
> _______________________________________________
> sam-users mailing list
> sam-users at nvg.ntnu.no
> http://nvg.ntnu.no/mailman/listinfo/sam-users
>
> _______________________________________________
> sam-users mailing list
> sam-users at nvg.ntnu.no
> http://nvg.ntnu.no/mailman/listinfo/sam-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://nvg.ntnu.no/pipermail/sam-users/attachments/20210910/37f1d300/attachment-0001.htm>