[Sam-users] Prodos v2 and simcoupe 1.2.5

[Edwin blink]

Great!

 

looking forward to a new Dev build.

 

 

Van: Stefan Drissen [mailto:stefan.drissen at gmail.com] 
Verzonden: vrijdag 10 september 2021 08:12
Aan: Edwin blink
CC: Dan Doore; sam-users
Onderwerp: Re: [Sam-users] Prodos v2 and simcoupe 1.2.5

 

And fixed by Simon. :-)

 

On Thu, Sep 9, 2021 at 11:46 PM Edwin blink <edwin.blink at ziggo.nl> wrote:

Thanks Dan and Stefan :)

 

Didn't want to submit an issue on Github right away in case I was just missing something obvious ;)

 

Van: Dan Doore [mailto:dan at dandoore.com] 
Verzonden: donderdag 9 september 2021 23:22
Aan: Edwin blink
CC: sam-users
Onderwerp: Re: [Sam-users] Prodos v2 and simcoupe 1.2.5

 

Put this on the SimCoupe GitHub issues - no wait, Stefan has already logged it :)

Dan.

 

 

On 9 Sep 2021, at 22:05, Edwin blink <edwin.blink at ziggo.nl> wrote:



This ones probably for Simon :)

 

I was playing a bit with  prodos v2 and noticed I get a read only error with current simcoupe buid  (1.2.5)

 

Example:

-Boot Prodos v2 disk in simcoupe

-from menu:  new DOS CP/M disk

-format  b: -> OK

-copy a: b:  -> is read only error

-format b: -> Format error

 

Didn’t have any issues when using simcoupe 1.0

 

 

_______________________________________________
sam-users mailing list
sam-users at nvg.ntnu.no
http://nvg.ntnu.no/mailman/listinfo/sam-users

_______________________________________________
sam-users mailing list
sam-users at nvg.ntnu.no
http://nvg.ntnu.no/mailman/listinfo/sam-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://nvg.ntnu.no/pipermail/sam-users/attachments/20210910/7fa71ca5/attachment.htm>